Division of Housing and Community Renewal Bulletin No. DH-62

Subject
October 2013 District Council 37 (DC37) Performance Advances
Date Issued
September 17, 2013

Purpose

To inform the Division of Homes and Community Renewal of OSC’s automatic processing of the October 2013 Performance Advances and provide instructions for payments not processed automatically.

Affected Employees

Employees in the Rent Regulation Services Unit – BU67 who meet the eligibility criteria

Background

Chapter 49 of the Laws of 2008, which implemented the 2007-2011 Agreement between the State of New York and DC37, provides for payment of performance advances on October 1 to eligible employees.

Effective Date(s)

The October 2013 Performance Advances will be paid using the following effective date and check date:

Pay Cycle/Pay Period Type Payment Effective Date Check Date
Administration 14 Lag 09/26/13 10/23/13

Eligibility Criteria

Performance Advance

Employees in graded positions (Grade 001-032) and NS positions (Grade 600) which are equated to a grade (Grade 001-032) and whose annual salary is below the Job Rate of the employee’s current grade on the 04/01/10 Salary Schedule are eligible for a performance advance provided the employee:

  • Is in a BU67 position on the payment effective date; and
  • Has completed one (1) year of service in such grade by 10/01/13; and
  • Has a Pay Basis Code of ANN on the payment effective date; and
  • Was rated at least “Satisfactory” or its equivalent on their last rating date; and
  • Did not receive a performance advance in April 2013.
Promotion Recalculation

Employees who would have been eligible to receive a performance advance in October 2013 but were promoted to a higher grade prior to October 2013 may be eligible for a revised promotion salary (promotion recalculation) provided the employee is not eligible for a performance advance in the higher grade in October 2013.

Ineligible for Performance Advance

Employees with an “Unsatisfactory” evaluation on their last rating date are ineligible to receive an October 2013 Performance Advance. The agency must submit a Data Chg on the Job Action Requests page using the Reason code USP (Unsat Perf) and an increment code of 1003 in the Incr. Code field to withhold the performance advance. The effective date should be the employee’s last rating date. These transactions should be submitted as soon as practicable following the employee’s rating date and must be submitted prior to the automatic processing of the October 2013 Performance Advances.

In addition, employees who have not completed one (1) year of service in their grade are ineligible to receive an October 2013 Performance Advance and are also identified using Increment Code 1003.

In preparation for next year’s performance advance processing, the increment code will be updated automatically as explained in the OSC Actions section.

Control-D Report Available Prior to Processing

The following Control-D report will be available for agency use on 09/27/13. This will give agencies time to correct employees’ records, if necessary, prior to the automatic processing of the October 2013 Performance Advances. The report will be sorted by agency code, then by employee name in alphabetical order.

NHRP708 – Mass Increment Payment Exception Report

This report is a preliminary listing of employees who appear ineligible to receive an October 2013 Performance Advance, Promotion Recalculation or Increment Code Update based on information available as of the date the report is produced. Included on the report is one of the following messages which identifies the reason the employee’s record will not be updated:

  • NYS Position Has Both Equated Grade and NTE
  • Position of Job do not match
  • FIS Missing
  • FIS At or Below Current
  • FIS Below Hiring Rate
  • Increment Code Missing
  • Increment Code Invalid
  • Inc Code not in Anniv Dt range
  • Sal Below Hiring Rate
  • Sal At or Above Job Rate

If an employee appears on this report but is due a performance advance, promotion recalculation or increment code update, the agency must take the following action:

  • Submit the appropriate transaction(s) on the Job Action Requests page to correct the information on the Job Data row(s). If the row(s) is corrected prior to Pay Period 14, the automatic performance advance, promotion recalculation or increment code update will be processed.
  • Submit a Position Change Request to the Position Management Unit if the position information is incorrect on the Position Data page in PayServ but is correct in NYSTEP. The position will be updated to reflect the change and the automatic performance advance, promotion recalculation or increment code update will be processed provided the agency’s position request contains the same information as the position information in NYSTEP.

Agency Actions – Pay Period 14

The following procedures must be used by the agency when submitting transactions in Pay Period 14L.

For pay changes, positions changes and transfers requested on the Job Action Requests or Transfer Requests page with an effective date on or before 09/26/13 (Administration):

  • The agency must not include the performance advance in the salary rate reported in the Pay Rate field.
  • The agency must report the proper increment code for October 2013 in the Incr. Code field.

For pay changes, position changes and transfers requested on the Job Action Requests or Transfer Requests page with an effective date after 09/26/13 (Administration):

  • The agency must include, if applicable, the performance advance in the salary rate reported in the Pay Rate field.
  • The agency must report the projected increment code based on the employee’s next performance advance cycle in the Incr. Code field.
Time Entry

To report miscellaneous earnings that are automatically calculated by the system (e.g. overtime), agencies must separate earnings by pay period so the earnings will not overlap the effective date of the Pay Change transaction.

OSC Actions

OSC will process the October 2013 Performance Advances, Promotion Recalculations and Increment Code Updates for those employees who meet the eligibility criteria and have a Payroll Status of Active, Leave With Pay or Leave of Absence due to a Workers’ Compensation Leave on the payment effective date with the following exceptions:

  • Eligible employees in a composite position (identified by Increment Code 2222).
  • Eligible employees in a Position which was previously downward reallocated (identified by Increment Code 0069).
  • Eligible employees with a Payroll Status of Leave With Pay and an Action/Reason code of Paid Leave of Absence/SKL (Sick Lv).
Performance Advance Processing

Performance advances will be processed for employees with Increment Code 1001 and an Anniversary Date between 04/02/xx and 10/01/xx. OSC will automatically insert a row on the employee’s Job Data page effective 09/26/13 (Administration) using the Action/Reason code of Pay Rate Change/PAV (Perf Adv) and will increase the employee’s salary rate to reflect payment of the performance advance. The employee’s salary rate will be capped at the Job Rate of the employee’s current grade on the 04/01/10 Salary Schedule.

Promotion Recalculation Processing

Promotion recalculations will be processed for employees with Increment Code 1004 who are entitled to a revised promotion salary based on the FIS (Fixed Increment Salary) Amount on the Job Data/Compensation page. The FIS Amount:

  • Must be equal to or greater than the Hiring Rate; and
  • Must be greater than the employee’s current salary; and
  • May exceed the Job Rate of the employee’s current grade on the 04/01/10 Salary Schedule.

OSC will automatically insert a row on the employee’s Job Data page effective 09/26/13 (Administration) using the Action/Reason code of Pay Rate Change/PMR (Prom Recal) and will update the employee’s salary rate to reflect the FIS Amount.

Increment Code Update Processing

OSC will automatically update the increment code on the inserted row for employees who receive a performance advance or promotion recalculation as follows:

Current Code Updated Code
1001 1001 if the new salary is below Job Rate
  1310 if the new salary is equal to Job Rate
1004 1001 if the new salary is below Job Rate and the Anniversary Date is 04/02/xx – 10/01/xx
  0001 if the new salary is below Job Rate and the Anniversary Date is 10/02/xx – 04/01/xx

OSC will automatically insert a row on the employee’s Job Data page effective 09/26/13 (Administration) using the Action/Reason code of Data Change/CIC (Chg IncCd/or AnnDt/or FIS Sal) and update the following increment code:

Current Code Updated Code
1003 1001 if the salary on the payment effective date is equal to or greater than Hiring Rate and below Job Rate and the Anniversary Date is 04/02/xx – 10/01/xx
Workers’ Compensation

For employees who are receiving Workers’ Compensation under the RRSU Medical Evaluation Program, the supplement will be recalculated by OSC when processing payments for disability dates beginning on 09/26/13 (Administration).

Transactions processed automatically will appear on the NHRP520 Daily Outbound Transaction file.

Beginning in Pay Period 15L, agencies may submit the appropriate transaction for the following employees who are eligible on the payment effective date but will not be processed automatically.  Refer to the appropriate instructions described below.

  • Eligible employees who are in a composite position (identified by Increment Code 2222) on the payment effective date.
  • Eligible employees who are in a position which was previously downward reallocated (identified by Increment Code 0069) on the payment effective date.
  • Eligible employees with a Payroll State of Leave With Pay and an Action/Reason code of Paid Leave of Absence/SKL (Sick Lv) on the payment effective date.
  • Eligible employees who are on a Paid or Unpaid Military Stipend Leave on the payment effective date.
  • Eligible employees who are Inactive or on a Leave of Absence not related to a Workers’ Compensation Leave on the payment effective date.
Increment Code 2222

Agencies must submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) effective 09/26/13 (Administration). Information regarding the composite position must be included on the General Comments page.

Increment Code 0069

Agencies must submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) effective 09/26/13 (Administration). The performance advance amount is based on the previous grade and the new salary cannot exceed the Job Rate of that grade. Information regarding the payment must be included on the General Comments page.

Paid Sick Leave

Employees with a Payroll Status of Leave With Pay and an Action/Reason code of Paid Leave of Absence/SKL (Sick Lv) on the payment effective date who completed one (1) year of service in their grade prior to the effective date of the Paid Sick Leave are eligible to receive the performance advance or promotion recalculation in October 2013. Agencies must submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) effective 09/26/13 (Administration).

Military Stipend Leave

Employees who are on a Paid or Unpaid Military Stipend Leave on the payment effective date may receive the performance advance or promotion recalculation when they return to the payroll.

If the effective date of the return from leave transaction is prior to Pay Period 14L, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) effective 09/26/13 (Administration).

If the effective date of the return from leave transaction is after Pay Period 14L, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code CSL (Cor Sal) and the effective date of the Return from Leave with the next available sequence number.

Inactive or Leave of Absence (not related to Workers’ Compensation Leave)

Employees who are Inactive or have a Payroll Status of Leave of Absence not related to a Workers’ Compensation Leave on the payment effective date and who completed one (1) year of service in their grade prior to becoming inactive or being place on Leave of Absence are eligible to receive the performance advance or promotion recalculation when they return to the payroll.

If the effective date of the return from leave transaction is prior to Pay Period 14, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) or a Data Chg on the Job Action Requests page using the Reason code CIC (Chg IncCd/or AnnDt/or FIS Sal) effective 09/26/13 (Administration).

If the effective date of the return from leave transaction is after Pay Period 14L, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code CSL (Cor Sal) or a Data Chg on the Job Action Requests page using the Reason code CIC (Chg IncCd/or AnnDt/or FIS Sal) and the effective date of the Return from Leave with the next available sequence number.

Determining Adjusted Performance Advance Cycle

When processing a transaction that may affect performance advance eligibility, such as but not limited to a return from leave transactions, the agency must determine if the employee will remain on the performance advance cycle on record and if necessary, update the employee’s increment code and anniversary date.

Agency Actions – Beginning Pay Period 15

The following Control-D reports will be available for agency review after the automatic payments have been processed. All reports will be sorted by agency code, then by employee name in alphabetical order.

NHRP704 – Mass Increment Payment Report

This report identifies all employees who received the automatic October 2013 Performance Advance or Promotion Recalculation. The report includes the Action/Reason code used as well as the old compensation rate and new compensation rate.

NHRP708 – Mass Increment Payment Exception Report

This report identifies employees who did not receive an automatic October 2013 Performance Advance, Promotion Recalculation or Increment Code Update. Included on the report is one of the following messages, identifing the reason the employee’s record was not updated.

  • NYS Position Has Both Equated Grade and NTE
  • Position of Job do not match
  • FIS Missing
  • FIS At or Below Current
  • FIS Below Hiring Rate
  • Increment Code Missing
  • Increment Code Invalid
  • Inc Code not in Anniv Dt range
  • Sal Below Hiring Rate
  • Sal At or Above Job Rate

Beginning in Pay Period 15L, agencies may submit the appropriate transaction for the following employees who are eligible on the payment effective date but will not be processed automatically. Refer to the appropriate instructions described below.

  • Eligible employees who are in a composite position (identified by Increment Code 2222) on the payment effective date.
  • Eligible employees who are in a position which was previously downward reallocated (identified by Increment Code 0069) on the payment effective date.
  • Eligible employees with a Payroll State of Leave With Pay and an Action/Reason code of Paid Leave of Absence/SKL (Sick Lv) on the payment effective date.
  • Eligible employees who are on a Paid or Unpaid Military Stipend Leave on the payment effective date.
  • Eligible employees who are Inactive or on a Leave of Absence not related to a Workers’ Compensation Leave on the payment effective date.
Increment Code 2222

Agencies must submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) effective 09/26/13 (Administration). Information regarding the composite position must be included on the General Comments page.

Increment Code 0069

Agencies must submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) effective 09/26/13 (Administration). The performance advance amount is based on the previous grade and the new salary cannot exceed the Job Rate of that grade. Information regarding the payment must be included on the General Comments page.

Paid Sick Leave

Employees with a Payroll Status of Leave With Pay and an Action/Reason code of Paid Leave of Absence/SKL (Sick Lv) on the payment effective date who completed one (1) year of service in their grade prior to the effective date of the Paid Sick Leave are eligible to receive the performance advance or promotion recalculation in October 2013. Agencies must submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) effective 09/26/13 (Administration).

Military Stipend Leave

Employees who are on a Paid or Unpaid Military Stipend Leave on the payment effective date may receive the performance advance or promotion recalculation when they return to the payroll.

If the effective date of the return from leave transaction is prior to Pay Period 14L, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) effective 09/26/13 (Administration).

If the effective date of the return from leave transaction is after Pay Period 14L, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code CSL (Cor Sal) and the effective date of the Return from Leave with the next available sequence number.

Inactive or Leave of Absence (not related to Workers’ Compensation Leave)

Employees who are Inactive or have a Payroll Status of Leave of Absence not related to a Workers’ Compensation Leave on the payment effective date and who completed one (1) year of service in their grade prior to becoming inactive or being place on Leave of Absence are eligible to receive the performance advance or promotion recalculation when they return to the payroll.

If the effective date of the return from leave transaction is prior to Pay Period 14, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code PAV (Perf Adv) or PMR (Prom Recal) or a Data Chg on the Job Action Requests page using the Reason code CIC (Chg IncCd/or AnnDt/or FIS Sal) effective 09/26/13 (Administration).

If the effective date of the return from leave transaction is after Pay Period 14L, the agency must enter a Return from Leave on the Job Data page and submit a Pay Change on the Job Action Requests page using the Reason code CSL (Cor Sal) or a Data Chg on the Job Action Requests page using the Reason code CIC (Chg IncCd/or AnnDt/or FIS Sal) and the effective date of the Return from Leave with the next available sequence number.

Determining Adjusted Performance Advance Cycle

When processing a transaction that may affect performance advance eligibility, such as but not limited to a return from leave transactions, the agency must determine if the employee will remain on the performance advance cycle on record and if necessary, update the employee’s increment code and anniversary date.

Questions

Questions regarding this bulletin may be directed to the Payroll Earnings mailbox.